Tips on How to Install Brand New Alloy Wheels
by
Levi Quinn
Installing alloy wheels on a vehicle is not as simple as it looks and you need a step by step procedure in order to do it as required. Much as it takes a few minutes, you need to be very careful when installing wheels to avoid any mishaps during the journey. Considering the fact that the wheels will most probably roll more than a million times and might travel over miles before they are changed or modified, it is important to proceed as required.
Before starting out on the installation process, it is important to check out the positions of the tires and match each tire to the correct wheel. When installing the new wheels in pairs, it is important to fix the new ones on the rear end, and the older wheels which are worn out at the front. The reason behind this is the fact that the rear tires play a huge role when it comes to maintaining control of the vehicle — especially on roads that are wet. It is advisable to find out if the alloy wheels fit before installing the wheels on the tires, and this can be properly done by using the manufacturer’s manual for proper fit. This is done using hand tools specifically. and it is advisable to raise the vehicle to a higher level. It is also advisable to place the hoist; or the jack, on a flat and leveled ground. The nuts and bolts are then removed appropriately. Experts highly condemn the use of wrenches that have been designed to have a powered impact. Using a four-way wretch to remove the lugs is the best option; or better yet, a socket that is on a breaker bar because the impact wretch has a high chance of ruining the lugs. The next step is to find out the fit of the new wheel on the hub of the vehicle, as some may need to be used with a centering ring. This ensures that the hub fits appropriately on the wheel. Ensure that the wheel’s circle for the bolt is identical to the one on your car, and that the wheel that is being installed comes into contact fully with the surface onto which it is being mounted. If these are not achieved, then you are advised to get in touch with customer support of the manufacturer’s company. A reliable way to figure out if the lug size is the one required is to try and fit them first even without having the alloy wheel in place. The same applies when you want to test the size of the bolt thread. The next inspection involves the temporary installation of the wheel to clarify the clearance of the caliper used by the brake disc. Next, you should use your fingers to thread the lugs and then tighten them. You should not feel any resistance from the bolt or lug during this practice, and you should not force them to fit either. After that, you are advised to put the transmission of the vehicle in a neutral state and then rotate the tires one at a time, ensuring that the edge of the caliper is not in contact with the inside of the rim. The final step is to ensure that the lug’s torque fits the specifications of the vehicle. However, it is advisable for you to get a technician to do this.
Find the best deal on the auto insurance coverage you need.
Click here
to visit us today for money-saving tips and receive
free auto insurance quotes
for the cheapest auto insurance rates from respected insurance companies.
Article Source:
Tips on How to Install Brand New Alloy Wheels}